MớiSản phẩm
Thiết bị kiểm tra, bảo dưỡng, lốp & khung gầm và dịch vụ EV dành cho các xưởng chuyên nghiệp.
Tất cả sản phẩm
Máy kiểm tra hệ thống mạch ô tô DM109Thiết bị sửa chữa và kiểm tra ô tô
- Máy làm sạch & kiểm tra kim phun nhiên liệu
- Máy dò rò rỉ khói
- Camera nội soi khớp xoay thông minh
- Máy kiểm tra hệ thống ắc quy
- Máy kiểm tra mạch ô tô
- Máy phân tích dầu và chất lỏng ô tô
- Thiết bị kiểm tra áp suất động cơ
- Máy kiểm tra bugi
- Đồng hồ vạn năng chẩn đoán
- Máy kiểm tra môi trường bảo dưỡng ô tô
- Dụng cụ kiểm tra xe đã qua sử dụng
- Đồng hồ đo áp suất chênh lệch kỹ thuật số
Hỗ trợ
Tài liệu hướng dẫn, cập nhật phần mềm, bảo hành và đào tạo cho thiết bị AUTOOL của bạn.
Trung tâm hỗ trợGiới thiệu
AUTOOL thiết kế và chế tạo thiết bị kiểm tra, bảo dưỡng ô tô chuyên nghiệp tại Thâm Quyến.
Giới thiệu về AUTOOL
Gặp gỡ AUTOOL tại AAPEX & SEMA 2026ATL-4.5C 4.5-Ton Single-Side Control Baseplate Two-Post Lift
AUTOOL ATL-4.5C 4.5-Ton Hydraulic Two-Post Lift for general repair, brake, suspension, and chassis service in low-ceiling workshops.
- Dual hydraulic cylinder direct drive with steel cable synchronization to maintain smooth and balanced movement between…
- Single-side control design improves locking and release efficiency.
- Gear-type arm locks combined with hook-type mechanical safety structures provide multi-level protection.
- Laser-cut load-bearing components, wear-resistant sliders, and imported sealing components help reduce long-term maintenance requirements.
- Rated Lifting Capacity
- 4500kg
- Lifting Range
- 95-1930mm
- Overall Height
- 2820mm
ATL-4.5C 4.5-Ton Single-Side Control Baseplate Two-Post Lift at a glance
- Rated Lifting Capacity
- 4500kg
- Lifting Range
- 95-1930mm
- Overall Height
- 2820mm
- Clearance Between Posts
- 2860mm
Tổng quan
ATL-4.5C 4.5-Ton Single-Side Control Baseplate Two-Post Lift
Designed for general repair, chassis inspection, brake, and suspension service operations, this 4.5-ton hydraulic two-post lift provides a practical solution for professional workshops. With an overall height of 2820 mm, it is well suited for repair bays with limited ceiling height while still providing excellent under-vehicle access.
Product Features
- Dual hydraulic cylinder direct drive with steel cable synchronization to maintain smooth and balanced movement between both posts.
- Single-side control design improves locking and release efficiency.
- Gear-type arm locks combined with hook-type mechanical safety structures provide multi-level protection.
- Laser-cut load-bearing components, wear-resistant sliders, and imported sealing components help reduce long-term maintenance requirements.
Thông số kỹ thuật
Technical data
ATL-4.5C
- Rated Lifting Capacity
- 4500 kg
- Lifting Range
- 95-1930 mm
- Raising / Lowering Time
- 50 s / 30 s
- Overall Height
- 2820 mm
- Clearance Between Posts
- 2860 mm
- Overall Width
- 3440 mm
- Power Supply
- 380V / 220V optional
- Motor Power
- 2.2 kW
Hỗ trợ
Manuals & downloads
Hướng dẫn sử dụng
ATL-4.5C-EN-Manual.pdf








